EMERPHONE - ELEVATOR PHONE 

EmerPhone systems are the perfect choice for any elevator phone application. Models range from simple circuit boards to be used with elevator panel emergency buttons to vandal proof stainless steel enclosures. Disability compliant features include call locator voice chips, braille lettering and a call indicator LED.

Simple to Operate
Using an EmerPhone is simple. The person requiring assistance presses the Emergency button. A pre-programmed telephone number is then dialed. The EmerPhone can be programmed with an alternate back-up number which will automatically dial if the first does not answer or rings busy. If the EmerPhone is on a dedicated line the attendant can also call the unit at any time.

Simple to Program
An EmerPhone can be programmed in one of two ways. It can be programmed remotely by touch tone or it can be ordered with a built-in keypad for on-site programming. The keypad may also be purchased separately to be used when needed.

Simple to Install
EmerPhone is designed using the latest low current, surface mount circuitry. That's why a virtually unlimited number of EmerPhone units can operate on a single phone line and only using phone line power. To install the unit you simply pull a telephone cable from the termination jack and plug it in.

Disability Compliant
EmerPhone units have been designed to comply with ADA and other international disability standards. Options to assist disabled persons include:

LED call indicator - EmerPhone features a dual colour LED that turns red to indicate a call has been placed and green to indicate it has been answered.
Braille lettering - EmerPhone systems can come with raised braille lettering to assist the visually impaired.
Call locator voice chip - EmerPhone voice chips can serve two functions. They can tell a caller that help is on the way or they can tell the monitoring station the address and location of the caller.
Voice recording - Some EmerPhone models have the ability to monitor and record the conversations relating to an emergency.

Many Models to Choose From

In cab mounting - When using the existing elevator emergency buttons, you can use either the EM101 complete module or you can purchase the 22-0663-01 circuit board separately. The EmerPhone circuit board is by far the smallest available, making mounting incredibly simple versus traditional bulky elevator phone systems.
Vandal prone areas - The EM201 and EM301 are rugged stainless steel units for areas where the durability of an unattended elevator phone is a concern.
Economy version - The EM401 and EM405 are the perfect units for general applications.

Most EmerPhone units can be ordered as handsfree or with a telephone handset.

Features

Options

• Call blocker jack - Allows multiple units to share phone line. Inhibits call back feature.
  
• Programming keypad
  
• Custom colours/silk screening
  
• ADA compliant Braille plates
  
• Relays for elevator recall
  
• Relay for connection to elevator alarms
  
• Voice chip to allow recorded messages indicating help is on the way and the exact location of the distress call
• Line powered units where the integrity of the phone line voltage is uncertain or to enhance audio

OEM Opportunities

Viscount welcomes your request for special functions and housings to meet your particular needs.

Specifications

All EmerPhone models connect using an RJ11 jack. Please call for additional model specific specifications.

Some models with relays and voice recording may require 12VAC power.